Kyocera FS-C2126MFP FS-C2026MFP/C2126MFP Operation Guide - Page 57

Preparation before Use Sleep and Auto Sleep Sleep To enter Sleep, press the Power key. Message Display and all indicators on the operation panel will go out to 2 save a maximum amount of power except the Main Power indicator. This status is referred to as Sleep. If print data is received during Sleep, the print job is performed while the Message Display remains unlit. If you are using the products equipped with the fax function, received fax data is printed out while the operation panel also remains unlit. To resume, press the Power key. The machine will be ready to operate in about 20 seconds. Note that ambient environmental conditions, such as ventilation, may cause the machine to respond more slowly. Auto Sleep Auto Sleep automatically switches the machine into Sleep Mode if left idle for 1 minute. Energy Saver (products that is not equipped with the fax function) This mode reduces power consumption even more than normal sleep mode, and allows sleep mode to be set separately for each function. Settings can be specified to prevent access from a computer, such as printing from a computer or accessing COMMAND CENTER, while the machine is asleep. To use the machine, press the Power key. The time required for the machine to wake up from power save mode and resume normal operation will be longer than for sleep mode. NOTE: Energy Saver mode settings, see Sleep Level on page 8-126. 2-9