Kyocera FS-C2126MFP FS-C2026MFP/C2126MFP Operation Guide - Page 64

Preparation before Use IPv4 Setting: a b *1 **D*H*C*P 2 Bonjour 3 Auto-IP [ Exit ] 11 Press the OK key. The IPv4 Setting menu appears. DHCP: a b 1 Off 2****O*n 12 Press the U or V key to select [DHCP]. 13 Press the OK key. DHCP appears. IPv4 Setting: a b 1 DHCP 2 Bonjour *3 **A*u*t*o*-*I*P************ [ Exit ] 14 Press the U or V key to select [On] and then press the OK key. Completed. is displayed and the screen returns to the IPv4 Setting menu. 15 Press the U or V key to select [Auto-IP]. Auto-IP: a b 1 Off 2****O*n 16 Press the OK key. Auto-IP appears. 17 Press the U or V key to select [On] and then press the OK key. Completed. is displayed and the screen returns to the IPv4 Setting menu. TCP/IP (IPv4) Setup (by Entering IP Addresses) Set up TCP/IP to connect to the Windows network. Set the IP addresses, subnet masks, and gateway addresses. The default settings are "TCP/IP Protocol: On, DHCP: On, Bonjour: Off, Auto-IP: On". NOTE: Before setting an IP address, ask your network administrator if your network environment requires input of an IP address. If input is necessary, ask your network administrator to obtain an IP address for you. 2-16