Kyocera FS-C2126MFP FS-C2026MFP/C2126MFP Operation Guide - Page 437
Maximum Number of, Status/Job Cancel
View all Kyocera FS-C2126MFP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 437 highlights
Troubleshooting Error Message Checkpoints Corrective Actions Reference Page Memory is full. - Job is canceled. Paper jammed. - Job not stored. - Press [OK]. Unable to continue the job as the - memory is used up. Press the OK key. To print the same originals, follow the operations below. • Select [Photo] for the quality of copies. • Select a nagative value for the sharpness. • Select the paper size smaller to reduce. If it is not resolved, expand the printer memory. If a paper jam occurs, the machine will stop and the location of the jam will be indicated on the Message Display. Leave the machine on and follow the instruction to remove the jammed paper. 10-16 Press the OK key to cancel storing. USB memory error. - Job is canceled. Place original - and press Start key. This job is canceled. Press the OK - key. Remove originals from the document processor, put them back in their original order, and place them again. Press the Start key to resume printing. Press the Status/Job Cancel key and press [Cancel] to cancel the job. 2-45 Remove original from Are there any originals left in Remove originals from the document - document processor. the document processor? processor. Maximum Number of - scanned pages. Job is canceled. Scanning cannot be performed due - to insufficient memory of scanner. The job is canceled. Press the OK key. Is the acceptable scanning Press the OK key to print, send or - count exceeded? store the scanned pages. Press the Status/Job Cancel key and press [Cancel] to cancel the job. Error occurred. - Turn the main power switch off and on. System error has occurred. Turn the - main power switch off and on. Incorrect account ID. - The Account ID does not match. - Check the registered Account ID. 10 10-9