Kyocera FS-C2126MFP FS-C2026MFP/C2126MFP Operation Guide - Page 438
Scan to SMB Error Code, Job Cancel
View all Kyocera FS-C2126MFP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 438 highlights
Troubleshooting Error Message File is not found. Top tray is full of Paper. Remove the paper. Unknown toner Installed. Unknown toner Installed. PC Insufficient memory. Cannot start the job Replace MK. Send error. #### Error Code:1101 Checkpoints - - Corrective Actions Reference Page The specified file is not found. The - job is canceled. Press the OK key. Remove paper from the top tray, and - press the OK key to resume the job. - If the toner container was taken from - a different machine of the same model while it was displaying the Add toner. message, ignore the message and use the toner. - This message is displayed if the installed toner container's regional specification does not match the machine's. - Further scanning cannot be - performed due to insufficient memory. Press the OK key to print the scanned pages. Press the Status/ Job Cancel key and press [Cancel] to cancel the job. - Replacement of the parts in the - maintenance kit is necessary at every 200,000 pages of printing and requires professional servicing. Contact your service technician. - An error has occurred during - transmission. The possible error codes and their descriptions are as follows. Scan to SMB Error Code Is the host name of the SMB Set the correct host name in - server incorrect? COMMAND CENTER. 10-10