Kyocera FS-C2126MFP FS-C2026MFP/C2126MFP Operation Guide - Page 441

Troubleshooting Error Message Checkpoints Corrective Actions Reference Page Error Code:2101, Did you enter an invalid host Enter the correct host name or IP - 2102, 2103, 2201, 2202, name or IP address? address. 2203, 2231, 3101 Is the wrong port number Specify the correct port number. - specified? Are you correctly connected Make sure that the network cable has - to the network? been correctly connected. Make sure that the network environment (server, hub, or other LAN network) is operating correctly. Error Code:4701, - 5101, 5102, 5103, 5104, 7102, 720f Turn the main power switch off and - then on. If this occurs repeatedly, write down the error code that appears in the message display and contact a service technician. (See the procedure in Machine failure. Call service.) Error Code:9181 Have more than 999 original If there are more than 999 original - pages been scanned? pages, send the pages in separate batches. Scan To Email Error Code Error Code:1101 Is the SMTP/POP3 server Set the correct server name in - name incorrect? COMMAND CENTER. Error Code:1102 Did you specify an invalid Enter the correct user name and - user or password? password. Error Code:1104 Did you specify the destination address? Specify the destination address. - Error Code:1105 Is SMTP protocol enabled? Enable SMTP protocol in COMMAND - CENTER. Error Code:2101, Is "Other Authenticate" Select a valid POP3 user other than - 2102, 2103, 2201, 2202, selected when POP before "Other". 2203 SMTP authentication is performed? Is the specified server an Set the correct server name in - SMTP server? COMMAND CENTER. Are you correctly connected Make sure that the network cable has - to the network? been correctly connected. Make sure that the network environment (server, hub, or other LAN network) is operating correctly. Error Code:2204 Were you attempting to send too much data? Change the size that can be sent in - COMMAND CENTER. 10 10-13