Kyocera KM-6030 Scan System Operation Guide (Functions Edition) Rev-9 - Page 246

Error Codes The following tables explain the error codes that may appear in the transmission log, and indicate the corresponding procedures for their correction. The transmission log can be accessed on the scanner's message display. For more detailed information, refer to the Set-up Edition of your Operation Guide. Error Code E001 E010 E011 E012 E020 Cause of Error Procedure for Correction The transmission in progress was canceled by the operator. The destination computer could not be found during data transmission. (An error occurred that could not be classified more clearly under any error code after E011.) Either that or the scanner could not find the computer that was running the personal Address Book. Transmission was stopped due to problems with the image data itself. The scanner attempted to transmit image data, but was unable to access the corresponding information in the personal Address Book due to a connection problem. An attempt to use the Send E-mail function was made, but the scanner was unable to find the SMTP server. - - - • Check to make sure that the destination computer is operating properly. • Check to make sure that there are no problems with any connections, such as checking that the network cables are connected properly. Try to perform the operation again. Check to make sure that the computer running the personal Address Book is operating properly. Check to make sure that there are no problems with any connections, such as checking that the network cables are connected properly. Either that or check with your network administrator to find out whether or not the SMTP server is working properly. Page A-2