Kyocera KM-6030 Scan System Operation Guide (Functions Edition) Rev-9 - Page 65

System Setting • New Password If you want to change the administration password, type a new password into this field (up to 8 characters). * The password that you register here is NOT related to the 4-number password that is required in order to access the Network screen in the scanner itself. • Confirm new password Type the same password as you did in the New Password field in here. * This procedure is necessary in order to ensure that the password was entered correctly. • Registration button Once you type the new administration password into both the New Password and Confirm new password fields and then click on this button, the new password will be registered in the Scanner Interface Card. * If you leave the Confirm new password field blank, or the password that you typed into that field does not match the password that you typed into the Change admin password field, an error message will be displayed. IMPORTANT! BE SURE to click on the Registration button after you set or change the password. • Firmware Updates Unauthorizede firmware updates present a potenially serious security threat. Someone could unintentionally or maliciously render the networking inperable by updating the network component with modified or incorrect firmware . the scanner network utilities provide security measures to prevent unauthorized firmeware updates. If you allow "Update", select "Yes". If you do NOT allow it, select "NO". Page 2-16