Kyocera KM-6030 Scan System Operation Guide (Functions Edition) Rev-9 - Page 60
System Setting, Setting Conditions
View all Kyocera KM-6030 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
System Setting Settings for the Scanner Interface Card are performed under the System Setting items. The settings for each item can only be changed when the scanner is in the "Ready" state. Setting Conditions If the administrator's password is preset in order to access the settings related to either the Scanner Interface Card or to the scanner itself, you are asked to enter the password. The password can be set through the Administrator item under System Basic Setting. Note Since the password is not registered in the factory default settings, the following window is not displayed. Page 2-11
Page 2-11
Settings for the Scanner Interface Card are performed under the
System Setting
items. The settings for
each item can only be changed when the scanner is in the
“
Ready
”
state.
Setting Conditions
If the administrator
’
s password is preset in order to access the settings related to either the Scanner
Interface Card or to the scanner itself, you are asked to enter the password.
The password can be set through the
Administrator
item under
System Basic Setting
.
Note
Since the password is not registered in the factory default settings, the following window is not
displayed.
System Setting