Kyocera KM-6030 Scan System Operation Guide (Functions Edition) Rev-9 - Page 48

Using the Scanner Function "Selec. of senders (users)" setting Normally, when using the scanner you must first perform the procedure to select the user. However, the "Selec. of senders (users)" setting is convenient when scanner use is restricted to certain users because, if you register a user under User Number 001 and then turn this setting On, you can skip that selection procedure and use the scanner right away. * If the "Selec. of senders (users)" setting is turned On but User Number 001 is not registered, an error message will appear and scanning will not be possible. (In this case of scanners that possess a touch panel.) 1 . Press the Default Setting / Counter (*) key on the scanner's operation panel and then access the Func. Def. setting screen on the touch panel. Refer to "(3) Making settings from the touch panel" on page 2-2 of the Set-Up Edition of your Operation Guide for the procedure on accessing the Func. Def. setting screen. 2 . Use the "L" and "M" cursor keys to select "Selec. of senders (users)" and then touch the "Change #" key. The Change Settings screen will appear. Page 1-29