Kyocera TASKalfa 3510i PrintFleet DCA Setup & User's Guide Rev- 4.2.1 - Page 13
Configuring communication settings, Changing and testing the communication method and port
View all Kyocera TASKalfa 3510i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
PrintFleet Printer DCA Using the Printer Data Collection Agent 5. Click the Triggers tab. 6. On the Triggers page, click New. The New Trigger dialog box opens. 7. In the New Trigger dialog box: • In the Settings area, select Daily. • In the Advanced Settings area, select the Repeat task every check box, choose 30 minutes from the drop-down list, and set the duration to Indefinitely. • Also in the Advanced Settings area, select the Enabled check box. • Click OK. 8. Click the Actions tab. 9. On the Actions page, click New. The New Action dialog box opens. 10. In the New Action dialog box: • In the Settings area, use the Browse button to navigate to and select the PrinterDCAService.exe file. • In the Add Arguments box, type commandline. • Click OK. 11. Click the Settings tab. 12. On the Settings page, clear the Stop the task if it runs longer than check box. 13. Click OK. 2.4 Configuring communication settings Changing and testing the communication method and port During the Printer DCA installation, the Printer DCA will attempt to establish basic communication with the central server using either HTTPS (default) or HTTP (secondary). Proxy settings can also be configured during installation, or at any time afterwards. If communication with the server is successful during installation, it is not necessary to change the communication method, port, or proxy settings. There are two methods the Printer DCA can use to send information to the central server: HTTPS and HTTP. During installation, the Printer DCA will attempt to establish communication with the central server, first, with HTTPS (port 443), and if that fails, HTTP (port 80). If you don't use the default port for your chosen method of communication, you will need to change this in the Printer DCA. You can change the communication method and port at any time. To change the Printer DCA communication method and port: 1. Under the Communication tab of the Printer DCA, in the Communication Method area, type in the protocol, followed by the hostname. 9