Kyocera TASKalfa 3510i PrintFleet DCA Setup & User's Guide Rev- 4.2.1 - Page 22
Enabling Rapid Scan, Enabling Printer Job Language (PJL), Setting the scan interval
View all Kyocera TASKalfa 3510i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
Enabling Rapid Scan Enabling Printer Job Language (PJL) PrintFleet Printer DCA Using the Printer Data Collection Agent To enable broadcast scanning: 1. Under the Scan tab, make sure the correct scan profile is selected from the Scan Profile list. For more information on scan profiles, see "Managing scan profiles" on page 14. 2. Under the General tab, in the Scanning Options area, click Enable Broadcast. 3. Click Save. Rapid Scan allows the Printer DCA to use multithreading, which significantly decreases the time it takes for the Printer DCA to complete a network scan. To enable Rapid Scan: 1. Under the Scan tab, make sure the correct scan profile is selected from the Scan Profile list. For more information on scan profiles, see "Managing scan profiles" on page 14. 2. Under the General tab, in the Scanning Options area, click Enable Rapid Scan. 3. Click Save. The number of scan threads can be controlled using the Number of scan threads box in the Miscellaneous area on the Advanced tab. The setting defaults to a reasonable value for the current system. Printer Job Language is an additional method that can be used to obtain information from devices connected to HP Jet Direct servers. Setting the scan interval Warning Enabling PJL can result in print jobs being sent to dot matrix and other old model or special use printers. Using PJL will result in a limited amount of information being collected from some devices connected to HP JetDirect print servers. To enable PJL: 1. Under the Scan tab, make sure the correct scan profile is selected from the Scan Profile list. For more information on scan profiles, see "Managing scan profiles" on page 14. 2. Under the General tab, in the Scanning Options area, click Enable PJL. 3. Click Save. The scan interval determines how often the Printer DCA will scan the network. The default scan interval is 60 minutes. It is generally not useful to set a scan interval for more than every 60 minutes. For example, new information is posted to PrintFleet 18