LG 42CQ610H Setup Guide - Page 21

Installer Menu (Cont.) Installer Menu Items 071 through 122 Menu Item 071 Function BCK. CH-TIME 073 CH NOT AVBLE 075 REVERT CH Value Range Default Value 0 ~ 7 2 0 / 1 0 0 / 1 0 077 QUICK SHUTOFF 0 ~ 17 0 078 UPN MSB 0 ~ 255 255 079 UPN MSB-1 0 ~ 255 255 080 UPN MSB-2 0 ~ 255 255 081 UPN LSB 0 ~ 255 255 082 CHKSM ERROR 0 / 1 1 083 HANDSHK TIME 0 ~ 5 5 084 PERMANENT BLK 0 / 1 0 087 REAR RGB EN. 0/1/17 1 088 EN NOISE MUTE 0 / 1 1 090 KEY LOCK 0 / 1 0 091 YPrPb2 EN 0 / 1 1 094 SAP MENU EN 0 / 1 1 096 DEF. ASP. RATIO 0 ~ 4 2 098 PRO:CENTRIC 0 ~ 2 0 099 BACK LIGHTING 1 ~ 100, 101 ~ 200, 255 (LQ630H) 201, 202, 255 * 100 (CQ610H) 102 ATSC BAND 0 ~ 4 4 103 ATSC TUNE MODE 0 / 1 1 104 START MINOR CH 0 ~ 255 0 106 ASP RATIO LOCK 0 / 1 0 116 VIDEO MUTE EN 0 / 1 0 117 FACT DEFAULT 0 / 1 0 118 POWER SAVINGS 1 / 3 3 119 DATA CHANNEL 0 ~ 135 0 121 P:C RF WAKE HR 0 ~ 23, 128 128 122 P:C RF WAKE MN 0 ~ 59 0 * 201, 202, 255 applicable for LQ630H TVs only. Brief Description of Function Chooses custom background color for the Channel-Time display. If set to 1 and item 028 CH. OVERIDE is set to 0, "NOT AVAILABLE" message is displayed if user direct tunes a channel that is not in the favorite channel list. If set to 1 and loss of MPI communication occurs, TV tunes to Start Channel. Allows TV to be turned OFF with press and hold of pillow speaker channel buttons. Set to 0 to disable. Set from 1 to 17 to define hold time. (See detailed descriptions.) User programmable number, most significant byte. User programmable number, most significant byte - 1. User programmable number, most significant byte - 2. User programmable number, least significant byte. If set to 1, enforces rigid MPI checksum. Relaxes MPI timing to be compatible with PC-based Windows-controlled systems. Removes block hours setting for Parental Control and makes block permanent. Set to 0 to disable RGB input. Set to 1 to enable RGB input. Set to 17 for Auto Configure. If set to 1, audio is muted if no signal is present. If set to 1, keyboard is locked out, IR is still functional. Set to 0 to disable HDMI 2. Set to 1 to enable HDMI 2. Set to 0 to disable feature on Function Menu. Set to 1 to enable feature on Function Menu. Sets default aspect ratio at power up. See detailed descriptions and item 106. Set to 0 to disable Pro:Centric operation. Set to 1 for Flash Mode. Set to 2 for GEM (Java Application) Mode. Sets the level of the TV picture back lighting. (See detailed descriptions.) Selects ATSC band. Set to 1 (default) for Physical Channel scan. Set to 0 for Virtual Channel scan. Selects Minor Start Channel. Set to 0 for NTSC. To retain set aspect ratio on power cycle, set to 1. Set to 0 for default ratio on power cycle. Set to 0 for Normal. Set to 1 for Blank. Set to 0 for Normal. Set to 1 to load presets for all Installer Menu settings. Set to 3 (default-b-LAN module only powered when TV is turned ON), or set to 1 (b-LAN module is always powered). (See detailed descriptions.) Set to 0 to disable. Set to the RF channel number of the data channel for Pro:Centric or TV E-Z Installation data. (See detailed descriptions.) Sets the hour for Wake On RF. The value "128" is displayed as "OFF." Directly entering 128 turns the Wake On RF feature OFF. Sets the minute for Wake On RF. Caution: Installer Menu settings may affect options available from the TV setup menus or the Function Menu. 206-4207 21