LG 42CQ610H Setup Guide - Page 57
Reference, LAN Setup & Overview
View all LG 42CQ610H manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
Reference: b-LAN Setup & Overview The b-LAN module is internal to the TV. It allows hospital/institution head end equipment with b-LAN technology to communicate, via the institution's RF distribution system, with the TV for configuration and control. Installer Menu item 118 POWER SAVINGS controls the power circuitry for both the embedded b-LAN module and the GAME CONTROL/MPI port. The default value is 003-the b-LAN module as well as the GAME CONTROL/MPI port circuitry is only powered when the TV is turned ON. See chart below. POWER SAVINGS 001 003 (default) TV Standby State TV Power On State b-LAN & GAME CONTROL/MPI Port Power b-LAN & GAME CONTROL/MPI Port Power On On Off On A b-LAN enabled head end device, such as an LG FMA-LG101, broadcasts over the RF distribution system to communicate to multiple TVs. When the TV is first installed, it must be turned ON in order for its embedded b-LAN module to receive communication from the head end device. At this point, if it is desired for the b-LAN module to always be powered, including while the TV is in Standby, set Installer Menu item 118 POWER SAVINGS to 001. Also, if MPI communication is required for external MPI control, set Installer Menu item 118 POWER SAVINGS to 001 so that the GAME CONTROL/MPI port circuitry is always powered. 206-4207 57