Lenovo ThinkCentre M50 Hardware Maintenance Manual (HMM) - Page 61
Serial, drive, drive, CD/RW, DVD/CD/RW, combo, Diskette
View all Lenovo ThinkCentre M50 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
1. Locate an available PATA IDE connector on the three-connector signal cable attached to either the PATA primary IDE or PATA secondary IDE connector on the system board. See "Identifying parts on the system board (all machine types)" on page 38. 2. Connect one end of the signal cable to the drive and the other to an available PATA IDE connector on the system board. 3. Connect a power connector to the drive. 4. Go to "Replacing the cover and connecting the cables" on page 63. Serial ATA hard disk drive A serial hard disk drive can be connected to either the SATA 1 IDE or SATA 2 IDE connector. 1. Locate the signal cable for the new drive. 2. Locate an available SATA IDE connector on the system board. See "Identifying parts on the system board (all machine types)" on page 38. 3. Connect one end of the signal cable to the drive and the other to an available SATA IDE connector on the system board. 4. Connect a power connector to the drive. 5. Go to "Replacing the cover and connecting the cables" on page 63. CD drive, DVD drive, CD/RW drive, or DVD/CD/RW combo drive 1. Locate the three-connector signal cable that comes with the computer or with the new drive. 2. Locate the PATA primary and secondary IDE connectors on the system board. See "Identifying parts on the system board (all machine types)" on page 38. 3. Connect one end of the signal cable to the drive and the other to the appropriate PATA IDE connector on the system board. To reduce electronic noise, use the connectors at the end of the cable only. 4. Connect the power connector to the drive. 5. If you have a CD-ROM audio cable, connect it to the drive and to the system board. See "Identifying parts on the system board (all machine types)" on page 38. 6. Go to "Replacing the cover and connecting the cables" on page 63. Diskette drive 1. Locate the diskette drive connector on the system board. See "Identifying parts on the system board (all machine types)" on page 38. 2. Connect one end of the signal cable to the drive and the other to the diskette drive connector on the system board. Chapter 6. Replacing FRUs 55