Lenovo ThinkCentre M50 Hardware Maintenance Manual (HMM) - Page 91
-XXX
View all Lenovo ThinkCentre M50 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 91 highlights
Diagnostic Error Code FRU/Action 089-197-XXX Microprocessor test warning 1. Make sure the component that is called out is connected and/or enabled 2. Re-run test 3. Component that is called out in warning statement 4. Component under test 089-198-XXX Microprocessor test aborted 1. Flash the system and re-test 2. Go to "Undetermined problems" on page 109 089-199-XXX Microprocessor test failed, cause unknown 1. If a component is called out, make sure it is connected and/or enabled 2. Go to "Undetermined problems" on page 109. 3. Flash the system and re-test 4. Replace component under function test 170-000-XXX Voltage Sensor(s) Test Passed No action 170-0XX-XXX Voltage Sensor(s) failure 1. Flash system 2. System board 170-195-XXX Voltage Sensor(s) Test aborted by user 1. Information 2. Re-start the test, if necessary 170-196-XXX Voltage Sensor(s) test halt, error threshold exceeded 1. Press F3 to review the log file 2. Re-start the test to reset the log file 170-197-XXX Voltage Sensor(s) test warning 1. Make sure the component that is called out is connected and/or enabled 2. Re-run test 3. Component that is called out in warning statement 4. Component under test 170-198-XXX Voltage Sensor(s) test aborted 1. If a component is called out, make sure it is connected and/or enabled 2. Flash the system and re-test 3. Go to "Undetermined problems" on page 109 170-199-XXX Voltage Sensor(s) test failed, cause unknown 1. Go to "Undetermined problems" on page 109 2. Flash the system and re-test 3. Replace component under function test 170-250-XXX 170-251-XXX Voltage Sensor(s) Voltage limit error 1. Power supply 2. System board 170-254-XXX Voltage Sensor(s) Voltage Regulator Module error 1. Voltage Regulator Module (VRM) 2. Microprocessor 3. System board Chapter 7. Symptom-to-FRU Index 85