Lenovo ThinkCentre M50 Hardware Maintenance Manual (HMM) - Page 86
-XXX
View all Lenovo ThinkCentre M50 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 86 highlights
Diagnostic Error Code 020-0XX-XXX PCI Interface error 020-195-XXX PCI Test aborted by user 020-196-XXX PCI test halt, error threshold exceeded 020-197-XXX PCI test warning 020-198-XXX PCI test aborted 020-199-XXX PCI test failed, cause unknown 020-262-XXX PCI system error 025-000-XXX IDE interface Test Passed 025-00X-XXX 025-01X-XXX IDE interface failure 025-027-XXX IDE interface Configuration/Setup error 025-02X-XXX 025-03X-XXX 025-04X-XXX IDE Interface failure 025-195-XXX IDE interface Test aborted by user 025-196-XXX IDE interface test halt, error threshold exceeded 80 Hardware Maintenance Manual FRU/Action 1. PCI card 2. Riser card, if installed 3. System board 1. Information 2. Re-start the test, if necessary 1. Press F3 to review the log file 2. Re-start the test to reset the log file 1. Make sure the component that is called out is connected and/or enabled 2. Re-run test 3. Component that is called out in warning statement 4. Component under test 1. If a component is called out, make sure it is connected and/or enabled 2. Flash the system and re-test 3. Go to "Undetermined problems" on page 109 1. Go to "Undetermined problems" on page 109 2. Flash the system and re-test 3. Replace component under function test 1. PCI card 2. Riser card, if installed 3. System board 1. No action 1. IDE signal cable 2. Check power supply 3. IDE device 4. System board 1. IDE signal cable 2. Flash the system 3. IDE device 4. System board 1. IDE signal cable 2. Check power supply 3. IDE device 4. System board 1. Information 2. Re-start the test, if necessary 1. Press F3 to review the log file 2. Re-start the test to reset the log file