Lexmark C520 Service Manual - Page 110
Print media transport
View all Lexmark C520 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 110 highlights
5022-xxx Print media transport The print media is picked from the input source and fed to the bump aligner roll. The media movement is detected by a sensor located in the paper pick mechanism. It does not matter where the media comes from (Tray 1, Tray 2, or, the MPF); it will enter the electrophotographic process at the bump aligner drive. The bump aligner motor drives the bump aligner roll which feeds the paper to the transfer belt. 500-sheet assembly pick tire Bump aligner roll Pick tire Backup aligner roll MPF pick tire Diagnostic aids 3-33
Diagnostic aids
3-33
5022-xxx
Print media transport
The print media is picked from the input source and fed to the bump aligner roll. The media movement is
detected by a sensor located in the paper pick mechanism. It does not matter where the media comes from (Tray
1, Tray 2, or, the MPF); it will enter the electrophotographic process at the bump aligner drive. The bump aligner
motor drives the bump aligner roll which feeds the paper to the transfer belt.
500-sheet assembly
pick tire
Bump aligner roll
MPF pick tire
Pick tire
Backup aligner roll