Lexmark C520 Service Manual - Page 202
Make sure the JTRAY1 and JTRAY2 connectors do not bind when passing through the frame
View all Lexmark C520 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 202 highlights
5. Remove the three mounting screws (C). 6. Release the front locking tabs (D). 7. Slide the paper pick mechanism forward until the rear locking tabs (E) release. E 5022-xxx C D 8. Lower the paper pick mechanism, and remove through the front of the printer. Note: Make sure the JTRAY1 and JTRAY2 connectors do not bind when passing through the frame access hole. Repair information 4-69
Repair information
4-69
5022-xxx
5.
Remove the three mounting screws (C).
6.
Release the front locking tabs (D).
7.
Slide the paper pick mechanism forward until the rear locking tabs (E) release.
8.
Lower the paper pick mechanism, and remove through the front of the printer.
Note:
Make sure the JTRAY1 and JTRAY2 connectors do not bind when passing through the frame
access hole.
C
E
D