Nokia IP390 Installation Guide - Page 40

4 About IP390 Appliance Network Interface Cards Figure 12 Gigabit Ethernet Crossover Cable Pin Connections 1 1 2 2 3 3 4 4 5 5 6 6 7 7 8 8 00020 Two-Port Copper Gigabit Ethernet Network Interface Card All NICs installed in an IP390 are installed into slots on the appliance. Gigabit Ethernet NICs can occupy any of the slots or subslots in an appliance that other NICs do not occupy. Note Copper Gigabit Ethernet NICs you use in IP390 appliances need to be the Version 2 type, as indicated on the right end of the NIC faceplate. These NICs are sold by Nokia under the order code NIF4425. Copper Gigabit Ethernet NIC Features The copper Gigabit Ethernet NIC supports the following features: „ Supports traffic at 10, 100, and 1000 Mbps „ High bandwidth „ Half-duplex mode operation up to 100 Mbps „ Packet tracing for analysis through tcpdump „ Compliance with IEEE 802.3ab Gigabit Ethernet specification 40 IP390 Security Platform Installation Guide