Home » Nokia Manuals » Network Security & Firewall Devices » Nokia IP390 » Manual Viewer

Nokia IP390 Installation Guide - Page 69

socket until it clicks into place.

Add to My Manuals
Save this manual to your list of manuals

Page 69 highlights

Replacing or Upgrading Memory 4. Remove any memory module necessary by pressing the two retaining clips outward and carefully pulling each DIMM upward as the following figure shows. IP390 00545 You might need to pull opposite ends of the DIMM alternately to gradually free it from the contact pins. 5. The memory DIMMs are keyed to prevent improper insertion. Press the new DIMM into the socket until it clicks into place. The top of the DIMM is smooth. The bottom edge has three different length sets of contacts, which mate with the slots on the socket. Be sure the contacts and slots are properly aligned before you insert the DIMM. IP390 Security Platform Installation Guide IP390 00544 69

Section	Page
Title Page	1
Contact Information	3
Contents	5
Tables	9
Figures	11
About This Guide	13
In this Guide	13
Conventions this Guide Uses	14
Notices	14
Command-Line Conventions	14
Text Conventions	15
Related Documentation	16
1 Overview	17
About the Nokia IP390 Appliance	17
Built-In Gigabit Ethernet Ports	18
PMC Expansion Slots	19
System Status LEDs	19
Managing the IP390 Appliance	20
Site Requirements, Warnings, and Cautions	21
Software Requirements	22
Product Disposal	22
2 Installing the Nokia IP390 Appliance	23
Before You Begin	23
Rack Mounting the Appliance	23
Connecting Power	24
Connecting to the Console or Auxiliary Port	25
Console Port	27
Auxiliary Port	28
Connecting to Network Interfaces	29
3 Performing the Initial Configuration	31
Using a Console Connection	31
Using Nokia Network Voyager	33
Viewing Nokia IPSO Documentation by Using Nokia Network Voyager	34
Using the Command-Line Interface	35
Using Nokia Horizon Manager	36
4 About IP390 Appliance Network Interface Cards	37
Four-Port 10/100 Mbps Ethernet Network Interface Card	37
Ethernet NIC Features	37
Ethernet NIC Connectors and Cables	38
Two-Port Copper Gigabit Ethernet Network Interface Card	40
Copper Gigabit Ethernet NIC Features	40
Copper Gigabit Ethernet Connectors and Cables	41
Two-Port Fiber-Optic Gigabit Ethernet Network Interface Card	42
Fiber-Optic Gigabit Ethernet NIC Features	43
Fiber-Optic Gigabit Ethernet NIC Connectors and Cables	44
Fiber-Optic Gigabit Ethernet NIC SFP Modules	44
Four-Port T1 Network Interface Card	45
T1 NIC Features	45
T1 Connectors and Cables	45
5 Installing and Replacing Network Interface Cards	49
Deactivating Configured Interfaces	49
Removing, Installing, and Replacing NICs	50
Before You Start	50
Configuring and Activating Interfaces	55
Monitoring Network Interface Cards	55
6 Installing and Replacing Components Other than Network Interface Cards	57
Replacing the Compact Flash Memory Card	57
Installing a Flash-Memory PC Card	60
Before You Begin	60
Transferring Files with the Flash-Memory PC Card	61
Installing or Replacing a Hard-Disk Drive	61
Before You Start	62
Configuring a Hard-Disk Drive for Logging	65
Replacing or Upgrading Memory	66
Before You Start	67
Replacing the Battery	70
7 Troubleshooting	75
General Troubleshooting Information	75
Troubleshooting Routing Problems	82
A Technical Specifications	87
Physical Dimensions	87
Space Requirements	87
Operating Temperature	87
NIC Interfaces	88
B Compliance Information	89
Declaration of Conformity	89
Compliance Statements	90
FCC Requirements (US)	91
FCC Notice (US)	91
Index	93
A	93
B	93
C	93
D	93
E	93
F	94
G	94
H	94
I	94
L	94
M	94
N	94
O	95
P	95
R	95
S	95
T	95
V	95
W	95

Match case Limit results 1 per page

Replacing or Upgrading Memory

IP390 Security Platform Installation Guide

Remove any memory module necessary by pressing the two retaining clips outward and

carefully pulling each DIMM upward as the following figure shows.

You might need to pull opposite ends of the DIMM alternately to gradually free it from the

contact pins.

The memory DIMMs are keyed to prevent improper insertion. Press the new DIMM into the

socket until it clicks into place.

The top of the DIMM is smooth. The bottom edge has three different length sets of contacts,

which mate with the slots on the socket. Be sure the contacts and slots are properly aligned

before you insert the DIMM.

00545

IP390

00544

IP390