Home » Nokia Manuals » Network Security & Firewall Devices » Nokia IP390 » Manual Viewer

Nokia IP390 Installation Guide - Page 51

From underneath the chassis tray assembly, remove the bezel retaining screws.

Add to My Manuals
Save this manual to your list of manuals

Page 51 highlights

Removing, Installing, and Replacing NICs 2. Use your fingers or a screwdriver to loosen the retaining screws that hold the chassis tray assembly. IP390 00525 Chassis tray assembly retaining screws 3. Gently pull the chassis tray assembly forward to expose the NIC connectors. Remove the tray completely to avoid damaging components. IP390 00537 4. From underneath the chassis tray assembly, remove the bezel retaining screws. 00529 If you are installing a NIC in an unoccupied slot, remove the blank bezel that occupies the space in the appliance front panel, retain it for future use, and proceed to step 7. IP390 Security Platform Installation Guide 51

Section	Page
Title Page	1
Contact Information	3
Contents	5
Tables	9
Figures	11
About This Guide	13
In this Guide	13
Conventions this Guide Uses	14
Notices	14
Command-Line Conventions	14
Text Conventions	15
Related Documentation	16
1 Overview	17
About the Nokia IP390 Appliance	17
Built-In Gigabit Ethernet Ports	18
PMC Expansion Slots	19
System Status LEDs	19
Managing the IP390 Appliance	20
Site Requirements, Warnings, and Cautions	21
Software Requirements	22
Product Disposal	22
2 Installing the Nokia IP390 Appliance	23
Before You Begin	23
Rack Mounting the Appliance	23
Connecting Power	24
Connecting to the Console or Auxiliary Port	25
Console Port	27
Auxiliary Port	28
Connecting to Network Interfaces	29
3 Performing the Initial Configuration	31
Using a Console Connection	31
Using Nokia Network Voyager	33
Viewing Nokia IPSO Documentation by Using Nokia Network Voyager	34
Using the Command-Line Interface	35
Using Nokia Horizon Manager	36
4 About IP390 Appliance Network Interface Cards	37
Four-Port 10/100 Mbps Ethernet Network Interface Card	37
Ethernet NIC Features	37
Ethernet NIC Connectors and Cables	38
Two-Port Copper Gigabit Ethernet Network Interface Card	40
Copper Gigabit Ethernet NIC Features	40
Copper Gigabit Ethernet Connectors and Cables	41
Two-Port Fiber-Optic Gigabit Ethernet Network Interface Card	42
Fiber-Optic Gigabit Ethernet NIC Features	43
Fiber-Optic Gigabit Ethernet NIC Connectors and Cables	44
Fiber-Optic Gigabit Ethernet NIC SFP Modules	44
Four-Port T1 Network Interface Card	45
T1 NIC Features	45
T1 Connectors and Cables	45
5 Installing and Replacing Network Interface Cards	49
Deactivating Configured Interfaces	49
Removing, Installing, and Replacing NICs	50
Before You Start	50
Configuring and Activating Interfaces	55
Monitoring Network Interface Cards	55
6 Installing and Replacing Components Other than Network Interface Cards	57
Replacing the Compact Flash Memory Card	57
Installing a Flash-Memory PC Card	60
Before You Begin	60
Transferring Files with the Flash-Memory PC Card	61
Installing or Replacing a Hard-Disk Drive	61
Before You Start	62
Configuring a Hard-Disk Drive for Logging	65
Replacing or Upgrading Memory	66
Before You Start	67
Replacing the Battery	70
7 Troubleshooting	75
General Troubleshooting Information	75
Troubleshooting Routing Problems	82
A Technical Specifications	87
Physical Dimensions	87
Space Requirements	87
Operating Temperature	87
NIC Interfaces	88
B Compliance Information	89
Declaration of Conformity	89
Compliance Statements	90
FCC Requirements (US)	91
FCC Notice (US)	91
Index	93
A	93
B	93
C	93
D	93
E	93
F	94
G	94
H	94
I	94
L	94
M	94
N	94
O	95
P	95
R	95
S	95
T	95
V	95
W	95