Oki B6300 B6200/6300 Technical Reference/User's Guide - Page 100
When the Print Quality is Poor - replace fuser e
View all Oki B6300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 100 highlights
5.3 When the Print Quality is Poor When the print quality is poor, select the closest symptom from the following table to rectify the problem. If the print quality does not improve after carrying out the appropriate action, contact our Printer Support Desk. Symptom Printing is light. (faded, blurred). Reason/Action The paper is damp. Replace with paper from a new ream. Refer to • "3.2 Loading Paper" (P. 47) The drum/toner cartridge is defective/damaged or there is no more toner inside the cartridge. Replace with a new drum/toner cartridge. Refer to • "6.1 Replacing the Drum/Toner Cartridge" (P. 111) The Draft Mode feature is on. Uncheck the [Draft Mode] check box on the [Detailed Settings] tab of the printer driver. Refer to • On-line Help for the printer driver Levers on both sides of the fuser unit are raised. Open cover B of this printer and push down the levers at both ends of the fuser unit. Black spots or streaks are printed. The drum/toner cartridge is defective or damaged. Replace with a new drum/toner cartridge. Dirt appears at equal intervals. Refer to • "6.1 Replacing the Drum/Toner Cartridge" (P. 111) The feed route of the paper is stained. Print a few pages to remove the stains. The drum/toner cartridge is defective or damaged. Replace with a new drum/toner cartridge. Refer to • "6.1 Replacing the Drum/Toner Cartridge" (P. 111) 96 5 Troubleshooting