Oki B6300 B6200/6300 Technical Reference/User's Guide - Page 116
Replacing the Drum/Toner Cartridge
View all Oki B6300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 116 highlights
Replacing the Drum/Toner Cartridge 1. Remove any output paper and open cover A. Note • When the offset catch tray (optional) is installed, fold the tray first before opening cover A. Important • Do not touch any parts inside the printer. 2. Hold the drum/toner cartridge by the grip and pull it out slowly. Note • To prevent the toner from dirtying the floor, lay a piece of paper on the floor first before putting the drum/toner cartridge down. 3. Take the new drum/toner cartridge out of the packaging box and shake it 7 to 8 times as shown in the diagram. Important • If the toner is not evenly spread out, the print quality may be reduced. Also, if you did not shake the drum/ toner cartridge well, there may be operating noise or the interior of the cartridge may be damaged during operation. • Do not touch the surface of the photosensitive drum. 4. Place the drum/toner cartridge on a flat surface and pull out the seal horizontally. Important • When pulling out the seal, pull it out horizontally. The tape might break if it is pulled out diagonally. • After the seal has been pulled out, do not shake or bump the drum/toner cartridge. 112 6 Daily Care