Oki B6300 B6200/6300 Technical Reference/User's Guide - Page 27

Printing on Custom Size Paper/Long Paper

Page 27 highlights

2.4 Printing on Custom Size Paper/Long Paper This section explains how to print on custom size paper such as long paper. The paper sizes that can be set on this printer are as follows: n For tray 1 n For trays 2 - 4 Long edge: 127 to 900 mm (5" to 35.4") Long edge: 148 to 356 mm (5.8" to 14") Short edge: 76 to 216 mm (3" to 8.5") * To load long-size paper with the long edge exceeding 356 mm (14"), load the paper with the edge protruding from the tray. Short edge: 98 to 216 mm (3.8" to 8.5") Important • Print quality on the part of the paper that extends beyond 356 mm cannot be guaranteed. Loading Custom Size Paper The way to load custom size paper with the long edge shorter than 356 mm in trays 1 to 4 is the same as loading standard size paper. For details, refer to "3.2 Loading Paper" (P. 47). To load long paper in tray 1, follow the procedure below: 1. Pull the paper tray out to its maximum. Note • Pull the extendable part out to its maximum. For details on the procedure to extend the paper tray, refer to "3.2 Loading Paper" (P. 47). 2. Load the paper with the side to be printed facing up. Curl up the back end of the paper so that it will not fall from the tray. 3. Push the paper tray completely into the printer. Important • Do not close the lid of the paper tray. 2.4 Printing on Custom Size Paper/Long Paper 23

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163

2.4 Printing on Custom Size Paper/Long Paper
23
2.4
Printing on Custom Size Paper/Long Paper
This section explains how to print on custom size paper such as long paper.
The paper sizes that can be set on this printer are as follows:
Important
Print quality on the part of the paper that extends beyond 356 mm cannot be guaranteed.
Loading Custom Size Paper
The way to load custom size paper with the long edge shorter than 356 mm in trays 1 to 4
is the same as loading standard size paper. For details, refer to “3.2 Loading Paper” (P. 47).
To load long paper in tray 1, follow the procedure below:
1.
Pull the paper tray out to its maximum.
Note
Pull the extendable part out to its maximum. For
details on the procedure to extend the paper tray, refer
to “3.2 Loading Paper” (P. 47).
2.
Load the paper with the side to be printed
facing up. Curl up the back end of the paper
so that it will not fall from the tray.
3.
Push the paper tray completely into the printer.
Important
Do not close the lid of the paper tray.
±
For tray 1
±
For trays 2 - 4
*
To load long-size paper with the long
edge exceeding 356 mm (14"), load
the paper with the edge protruding
from the tray.
Short edge:
76 to 216 mm (3" to 8.5")
Long edge:
127 to 900 mm
(5" to 35.4")
Short edge:
98 to 216 mm (3.8" to 8.5")
Long edge:
148 to 356 mm
(5.8" to 14")