Onkyo TX-SV636 Owner Manual - Page 24

Receiving stations 1'9'0/10 DIRECT TUNING FM MUTE/MODE o® 0 • 2 3 24 FM ...DOWN TUNING UP • FM AM DIRECT TUNING I _f [I a I 7 2 I 5 I 8 f 3 Il 6 II 6 1 FM MUTE/MODE FM 41DOWN TUNING UP II. AM Manual tuning 1. Press the FM or AM button. 2. Use the TUNING UP/DOWN buttons to change the frequency. UP the frequency increases. DOWN the frequency decreases. • The frequency, is changed in 50kHz steps in FM and l0kHz (or 9kHzi in AM when the TUNING UP/DOWN button is pressed in single steps. • In FM, if this button is held continu- ously for more than 0.5 seconds, the fre- quencies are scanned automatically (FM auto tuning mode). When a hmadcast is received, scanning stops. Direct tuning 1. Press the FM or AM button. 2. Press the DIRECT TUNING button. The " :" will Hash 16 seconds in the frequency display. 3. Enter the frequency with the number buttons while the cursor are Hashing. Example: 58. I 0MHz 0/ I 0 Use the WI() number button to enter a 0. • II you enter a trequency that is out range. this unit will return to the previous frequency. If this happens, repeat the procedure. • If you enter a frequency that does not have a station, this unit will automatically tune to the next station immediately below that station. • When receiving AM broadcasts with a 10kHz steps, entering a number for the l0kHz digit will set the I kHz digit automatically to 0. FM MUTE > OFF I Listening to a stereo radio stations (FM mode) If you tune in a stereo FM station. the STEREO indicator will be illuminated if the signal is sufficiently strong. If the signal is weak, it may be impossible to tune m to your desired station. In this case, tune in as follows. Press the FM MUTE/MODE button and FM MUTE OFF indicator lights. At this time, the station will he in mono and interstation noise will he heard. Select the station you want listen to.