Onkyo TX-SV636 Owner Manual - Page 32

Recording a source REC OUT SCIRCE-1 Lit [vnEo-, VIDEO Recording a source different from the one being played: 1. Press the REC OUT button. 2. Press the input selector button of the source to be recorded while the REC OUT indicator is flashing. The chosen source ss ill he displayed in a red box. (*) 3. Start the source selected in step 2, and start recording on the VCR connected to VIDEO-3. NK ',PCS '1 • r] On-screen Press the ENTER button. Select the Rec Selector from the Menu screen using • or V cursor button, and press the ENTER button. Press the 4 or ► cursor button to select SOURCE. Follow the instruction "Picture. Sound- of "L.:se on Screen on page 30 for selection. TV antenna ,ar'" VCR OUTPUT IDEO QC \ AUDIO R FM antenna O VCR I for recording) Monitor TV INPUT VIDEO AUDIO „ VIDEO 0 AUDIO 0 INPUT O II I Rear panel of TX-SV636 1 3 VIDEO, NNW VCR VIDEO, IDE0-3 VCR ODEO4 V/DEO CAM REC OUT 4 TAPE XI OR l; -7 I Playback and recording of TV picture and FM/Cable TV sound Recording of a TV broadcast and FM broadcast (simulcast) is possible when two VCR are used. 1. Receive the TV broadcast using the VCR tuner. 2. Press the VIDEO-2 or VIDEO-3 input selector to set the picture to VIDEO-2 or VIDEO-3. 3. Press the FM button of input selector and tune in the FM simulcast using a TUNING UP/DOWN button or the CH (up)/ (down) button on the remote controller. The picture will he sent to the monitor TV and the FM stereo sound to the speakers connected to this unit. 4. To record the TV picture with FM sound, receive the TV broadcast using one VCR (connected to VIDEO-2 (or VIDEO-3)) and begin recording on the other VCR (connected to VIDEO-3 (or VIDEO-2)). The program can he monitored during recording. Mixing video and audio for VCR recording 1. Press the input selector button to select the VCR (VIDEO-1, 2 , 3 or 4) that will be used to play the video. 2. Press the REC/PAUSE button on the VCR (VIDEO-2 or 3) that will be doing the recording. 3. Press the REC OUT button. 4. Press the input selector button (CD, PHONO, FM, AM, TAPE-1, or TAPE-2) that will provide the audio source. Only the audio will be changed. 5. Start operation of the equipment. The picture will be recorded from the video source, and the sound from the audio source. 32