Onkyo TX-SV636 Owner Manual - Page 26

Using preset stations 0-- C=1 =MO a I= p=7 - I -I CLEAR U r. 2 0.1,11. 3Fr- Se0 e c TUNER , _ FTAEME _ . h UU Y Sur ode -PRO LOGIC UU THEAT ,IR 3 4SID2.4. 0 ... e t- Pres t, tom ! nE : oa . so FRIN 1 C. MEMORY FM MUTE/MODE O 0 L.- CLEAR a a5 ..„ ENTER Cursor On-screen 1. Press the ENTER button and the Menu screen is displayed. Move the cursor to Input Selector using A or V cursor button and press the ENTER button. 2. Move the cursor to Sound and press the 41 or IP- cursor button to select TUNER. 3. Select the desired Group and Preset channel using the 41 or P. cursor button. Group Indicates the current group of the Tuner Preset memory (A to C). Pressing the or 11. cursor button will change the group. When the group is changed, the number shown below the new group will indicate the last channel that was selected for that group. If there are no channels set on that group at all, that group will be skipped entirely. Preset Indicates the channel preset for the selected group of the Tuner. Pressing the -4 cursor button will change the channel downward. and pressing the IN. cursor button will change the channel upward. • If no preset channels are set in any group. the group and preset indications will not change. as there are no presets to select. Cancelling preset stations 1. Select the station as explained in the previous section. 2. Press the FM MUTE/MODE button while holding down the MEMORY button. " _ _" will be shown on the channel display. • Once the preset station has been cancelled, the memory location can be used to store another station. 26