Onkyo TX-SV636 Owner Manual - Page 39

Setting the surround parameters Center speaker Front speaker (L) Listening position L1 (m) Front speaker (R) vI L (m) Rear speaker Rear speaker To calculate optimum setting for your room, measure the distances L I and L2 as shown above. then work out the delay times from the following table. Lt -L2=1:15 to 23 msec L1-L2=2:16 to 26 msec I Lt -L2=3:19 to 29 msec L1-L2=4:22 to 30 msec L1-L2=5:25 to 30 msec car.rxr-sro (:( De_ay T i me Delay Time 1 4 PARAMETER CONTROLLER ► 2 .4 PARAMETER SELECTOR ► Explanation 3: Delay time By adjusting the delay time, and t irefully adjusting master volume level, center volume level, rear volume level, the apparent acoustic size of your listening room can be enlarged or reduced. Adjustable delay time allows you to tailor the accoustic size of your listening enviroment to the sonic characteristics of the audio program, because a short delay in the audio signal coming from the rear speakers gives the impression that it had to travel a longer distance to reach the listener, hence a larger room or hall. Dolby Surround delay time is specified at 20 msec. It is recommended that initial Dolby Surround delay be set at 20 msec, but adjustment from 15 to 30 msec is possible. On-screen Move the cursor to Delay Time using A or V cursor button and use the 41 or ► cursor button to adjust the delay time. To return to the Surround Setup screen. Move the cur- sor to ESC using A or V cursor button and press the ENTER button. Main unit 1. Use the PARAMETER SELECTOR -4 or ► button to select Delay time. 2. Use the PARAMETER CONTROLLER -I or ► but- ton to adjust the delay time. The adjustment can be made from IS -16 29 30 msec. onfl'o Surrcund Setup Sur DeLBY de =PRO LOGIC nn Center Mode=WIDEBAND(MP DetayTime = 20mS nn TestTone = OFF nn (Level Cal . ) DEFAULT Explanation 4: initlalization Move the cursor to DEFAULT using A or ► cursor button. Press the ► cursor button. Yes and No is displayed. Press the 4 cursor button to initialize the system. When initialization is carried out, each level is initialized as follows. Center level = 0 dB Rear level = 0 dB Delay Time = 20 msec Theater Size = 1 .0 Sur. SP. Image= 1.0 Reverb level = 1 .0 Reverb Time = 1 .0 Effect Level = 1 .0 Hall Size = 1 .0 Hall Shape = 1.0. Center Mode = NORMAL Test Tone = OFF 39