Pioneer AVH-P8400BH Owner's Manual - Page 57
Audio adjustments, Menu operations
View all Pioneer AVH-P8400BH manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
Menu operations Section 15 Menu operations Audio adjustments Using fader/balance adjustment You can change the fader/balance setting to provide an ideal listening environment for all of the occupied seats. 1 Display the audio function menu. Refer to Introduction of menu operations on the previous page. 2 Touch Fader/Balance on the audio function menu. 3 Touch a or b to adjust the front/rear speaker balance. Range: Front 15 to Rear 15 # Select F/R 0 L/R 0 when only using two speakers. # The front/rear speaker balance cannot be adjusted when the rear output setting is Subwoofer. Refer to Setting the rear output and subwoofer controller on page 64. 4 Touch c or d to adjust the left/right speaker balance. Range: Left 15 to Right 15 Note You can also set the fader/balance by dragging the dot on the displayed table. Using the equalizer You can adjust the equalization to match the car's interior acoustic characteristics as desired. Recalling equalizer curves There are seven stored equalizer curves which you can easily recall at any time. Here is a list of the equalizer curves. Display Powerful Natural Vocal Equalizer curve Powerful Natural Vocal Display Flat Custom1 Custom2 S.Bass Equalizer curve Flat Custom 1 Custom 2 Super bass ! The equalizer curves for Custom1 and Custom2 can be adjusted. ! You cannot select Custom1 and Custom2 when using the auto-equalizer. ! When Flat, no changes are made to the sound. You can check the effects of the equalizer curves by switching alternatively between Flat and another equalizer curve. 1 Display the audio function menu. Refer to Introduction of menu operations on the previous page. 2 Touch Graphic EQ on the audio function menu. # You cannot select or adjust the equalizer curves of Custom1 and Custom2 when using the auto-equalizer. 3 Touch the desired setting. S.Bass-Powerful-Natural-Vocal-Flat- Custom1-Custom2 Adjusting the 8-band graphic equalizer You can adjust the level of each band for the equalizer curves. ! A separate Custom1 curve can be created for each source. If you make adjustments when a curve other than Custom2 is selected, the equalizer curve settings will be stored in Custom1. ! A Custom2 curve that is common for all sources can be created. If you make adjustments when the Custom2 curve is selected, the Custom2 curve will be updated. 1 Display the audio function menu. Refer to Introduction of menu operations on the previous page. En 57