Pioneer AVH-P8400BH Owner's Manual - Page 59
Using the high pass filter, Adjusting source levels
View all Pioneer AVH-P8400BH manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
Menu operations Section 15 Menu operations 1 Display the audio function menu. Refer to Introduction of menu operations on page 56. 2 Touch c or d to select a desired level. Range: 0 to +6 Using the high pass filter When you do not want low sounds from the subwoofer output frequency range to play from the front or rear speakers, turn on the HPF (high pass filter). Only frequencies higher than those in the selected range are output from the front or rear speakers. 1 Display the audio function menu. Refer to Introduction of menu operations on page 56. 2 Touch c or d next to the frequency to select cut-off frequency. Off (off)-50Hz-63Hz-80Hz-100Hz- 125Hz Only frequencies higher than those in the selected range are output from the front or rear speakers. 4 Touch a or b to adjust the source volume. Range: +4 to -4 Notes ! When selecting FM as the source, you cannot switch to Source Level Adjuster. ! The AM volume level can also be adjusted with this function. ! Video CD, CD, compressed audio, DivX, MPEG-1, MPEG-2 and MPEG-4 are automatically set to the same source level adjustment volume. ! When an iPod and a USB storage device are connected to USB input 1 or USB input 2, the source level adjustment volume for each is automatically set to the same level for each USB input. USB input 1 and USB input 2 are not automatically set to the same setting. ! External unit 1 and external unit 2 are automatically set to the same source level adjustment volume. Adjusting source levels With SLA (source level adjustment), the volume levels of each source can be adjusted to prevent significant differences between sources. ! Settings are based on the FM volume level, which remains unchanged. 1 Display the audio function menu. Refer to Introduction of menu operations on page 56. 2 Compare the FM volume level with the level of the source you wish to adjust. 3 Touch Source Level Adjuster on the audio function menu. En 59