Pioneer AVH-P8400BH Owner's Manual - Page 58
Menu operations - microphone
View all Pioneer AVH-P8400BH manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
Section 15 Menu operations 2 Touch Graphic EQ on the audio function menu. 3 Touch the desired setting. S.Bass-Powerful-Natural-Vocal-Flat- Custom1-Custom2 4 Touch the table to adjust the level of the equalizer band. Range: +12dB to -12dB Using the auto-equalizer The auto-equalizer is an equalizer curve created by auto EQ (refer to Auto EQ (auto-equalizing) on page 68). You can turn the auto-equalizer on or off. If you connect an optional microphone to this unit, you can use this function. 1 Display the audio function menu. Refer to Introduction of menu operations on page 56. 2 Touch Auto EQ to turn the auto-equalizer on or off. # You cannot use this function if auto EQ has not been carried out. Using sonic center control Sound that is suited for the listening position can easily be created with this function. 1 Display the audio function menu. Refer to Introduction of menu operations on page 56. 2 Touch Sonic Center Control on the audio function menu. 3 Touch c or d to select a listening position. Range: Left 7 to Right 7 Adjusting loudness Loudness compensates for deficiencies in the low-frequency and high-frequency ranges at low volume. 1 Display the audio function menu. Refer to Introduction of menu operations on page 56. 2 Touch c or d to select a desired level for loudness. Off (off)-Low (low)-Mid (mid)-High (high) Using subwoofer output This unit is equipped with a subwoofer output which can be turned on or off. ! The cut-off frequency and output level can be adjusted when the subwoofer output is on. 1 Display the audio function menu. Refer to Introduction of menu operations on page 56. 2 Touch Subwoofer on the audio function menu. 3 Touch On or Off next to Subwoofer to turn the subwoofer output on or off. 4 Touch Normal or Reverse next to Phase to select the phase of subwoofer output. 5 Touch c or d next to Level to adjust the output level of the subwoofer. Range: +6 to -24 6 Touch c or d next to Frequency to select the cut-off frequency. 50Hz-63Hz-80Hz-100Hz-125Hz Only frequencies lower than those in the selected range are outputted from the subwoofer. 58 En Boosting the bass You can boost the bass level.