Pioneer VSX-1021-K Owner's Manual - Page 55
Resetting the remote control, settings
UPC - 884938132978
View all Pioneer VSX-1021-K manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
off, followed by this receiver (switch of all the zones becomes off). ! In order to avoid accidently switching off a DVD recorder that is currently recording, no DVD recorder power off codes are sent. Erasing the settings for the multi-operation This erases all the settings programmed in the remote control for the multi-operation. 1 Press and hold RCU SETUP, then press '8' for three seconds. Release the button after the LED flashes once. The LED continues to flash. ! To cancel the preset setup mode press RCU SETUP. 2 Press the input function button containing the program you want to cancel or the u SOURCE button for three seconds. If the LED lights for one second, the erasing has been successfully completed. Default preset codes Input function button DVD BD DVR/BDR HDMI TV/SAT CD TV CTRL Preset code 2158 2160 2150 2159 0116 5066 0116 Resetting the remote control settings Use this procedure to reset all the remote control's settings to the factory default. ! When preset codes are set, all the signals learned in the input function buttons are cleared. This function is convenient when you want to reset some but not all of input function buttons. 1 Press and hold RCU SETUP, then press '0' for three seconds. Release the button after the LED flashes once. The LED continues to flash. 2 Press and hold the ENTER button for three seconds. If the LED lights for one second, the erasing has been successfully completed. Controlling the rest of your system 10 En 55