Ricoh 8100DN Software Guide - Page 123

Printing with the Finisher Printing with the Finisher You can staple or punch holes in printed paper by installing the optional finisher. Make sure you read the following precautions when using the optional finisher. Important ❒ Make option settings for the printer using the printer driver when bidirectional communication is disabled. ❒ Be sure to set the paper size and paper orientation in the printer driver when using duplex printing, staple and punch functions. 3 Note ❒ When printing restarts after removing jammed paper, the printing position may be different, depending on the location of the jam. • If the paper jam occurred in the optional finisher, printing will restart from the top page of the data currently being printed, or from the page where the paper jam occurred. • If the paper jam occurred in the printer, printing will restart from the page where the paper jam occurred. • Even if the paper jam occurred in the printer, the error will not be cleared unless the cover of the finisher is opened and closed. Reference For information about optional finishers, see Hardware Guide. Staple With the optional Finisher SR3040 installed, sets can be stapled individually when printing multiple sets. Staple Position The specified staple position varies depending on paper size, type, quantity and feed orientation. The following table shows staple positions: 111