Ricoh 8100DN Software Guide - Page 217

Remote Maintenance by telnet show Use the "show" command to display network interface board configuration settings. ❖ View settings msh> show • If "-p" is added, you can view settings one by one. Reference For details about the information displayed, see p.228 "Configuring the Network Interface Board". slp Use "slp" command to view and configure SLP settings. msh> slp ttl "ttl_val" 5 • You can search the NetWare server using SLP in the PureIP environment of NetWare 5/5.1 and Netware 6/6.5. Using the "slp" command, you can con- figure the value of TTL which can be used by SLP multicast packet. • The default value of TTL is 1. A search is executed only within a local segment. If the router does not support multicast, the settings are not available even if the TTL value is increased. • The acceptable TTL value is between 1 and 255. smb Use the "smb" command to configure or delete the computer or workgroup name for SMB. ❖ Computer Name settings msh> smb comp "computer name" • Set computer name using up to 15 characters. Names beginning with "RNP" or "rnp" cannot be entered. ❖ Working Group Name settings msh> smb group "work group name" • Set workgroup name using up to 15 characters ❖ Comment settings msh> smb comment "comment" • Set comment using up to 31 characters 205