Ricoh 8100DN Software Guide - Page 248
Interface interface name: Duplicate IP Ad, Established SPX Connection with PServer
UPC - 026649025952
View all Ricoh 8100DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 248 highlights
Monitoring and Configuring the Printer Message Problem and solutions DHCP lease time expired. DHCP lease time has expired. The printer tries to discover the DHCP server again. The IP address until now becomes invalid. DHCP server not found. The DHCP server was not found. Make sure that the DHCP is on the network. dhcpcd start. The DHCPCD service (dhcp client service) has started. Duplicate IP=(from). The same IP address (IPv4, or IPv6 address) was used. Each IP address (IPv4, or IPv6 address) must be unique. Check the address of the device indicated in [MAC address]. Established SPX Connection with PServer, (RPSocket=, connID=) (In the remote printer mode) Connection to the print server has been established. exiting 5 Exit pserver The lpd service has ended and the system is exiting the process. (In the print server mode) The print server function is disabled because the necessary print server settings have not been made. Frametype = The frame type name is configured to be used on NetWare. httpd start. The httpd service has started. IEEE 802.11b mode Displays IEEE 802.11b communication mode. inetd start. The inetd service has started. Interface (interface name): Duplicate IP Address (IP address). The same IP (IPv4 or IPv6) address was used. Each IP address must be unique. Check the address of the device indicated in [IP address]. < Interface > started with IP: < IP address > IP address (IPv4, or IPv4 address) has been set for the interface and is operating. < Interface >: Subnet overlap. The same IP address (IPv4, or IPv6 address) and the subnet mask is used with other device. IPP cancel-job: permission denied. The printer could not authenticate the name of the user attempting to cancel a job. IPP job canceled. jobid=%d. The spooled job was canceled due to error or user request. LeaseTime=(sec), RenewTime=(sec). The resource lease time received from the DHCP server is displayed in [lease time] in seconds. The renewal time is displayed in [renew time] in seconds. Login to fileserver (,) (In the print server mode) Login to the file server is in the NDS or BINDERY mode. Memory allocate error. Data cannot be obtained. Disconnect the USB cable, and then connect it. 236