Ricoh 8100DN Software Guide - Page 214
set, Route initialization
UPC - 026649025952
View all Ricoh 8100DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 214 highlights
Monitoring and Configuring the Printer ❖ Setting IPv6 Default Gateway msh> route add6 default gateway ❖ Adding a specified IPv6 destination to Routing Table msh> route add6 {destination} prefixlen gateway • Specify the IPv6 address to destination and gateway. ❖ Deleting a specified IPv6 destination from Routing Table msh> route delete6 {destination} prefixlen • Specify the IPv6 address to destination and gateway. ❖ Display information about a specified IPv6 route information msh> route get6 {destination} • Specify the IPv6 address to destination and gateway. ❖ Enabling/disabling a specified IPv6 destination 5 msh> route active6 {destination} prefixlen {on | off} ❖ Route initialization msh> route flush Note ❒ The maximum number of IPv4 routing tables is 16. ❒ The maximum number of IPv6 routing tables is 2. ❒ Set a gateway address when communicating with devices on an external net- work. ❒ The same gateway address is shared by all interfaces. ❒ "Prefixlen" is a number between 1 and 128. set Use the "set" command to set the protocol information display "active" or "inactive". ❖ View settings The following command displays protocol information (active/inactive). msh> set ipv4 msh> set ipv6 msh> set appletalk msh> set netware msh> set smb msh> set protocol • When protocol is specified, information about TCP/IP, AppleTalk, Net- 202 ware, SCSI print, and SMB appears.