Ricoh 8100DN Software Guide - Page 205
dns, msh> dns number server server address
UPC - 026649025952
View all Ricoh 8100DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 205 highlights
Remote Maintenance by telnet dns Use the "dns" command to configure or display DNS (Domain Name System) settings. ❖ View settings The following command displays current DNS settings: msh> dns ❖ IPv4 DNS server configuration The following command enables or disables the IPv4 DNS server address: msh> dns "number" server "server address" The following command displays a configuration using the IP address 192.168.15.16 on a DNS 1 server: msh> dns 1 server 192.168.15.16 • You can register IPv4 DNS Server address. • You can register up to three IPv4 DNS server numbers. 5 • You cannot use "255.255.255.255" as the DNS server address. ❖ IPv6 DNS server configuration The following command enables or disables the IPv6 DNS server address: msh> dns "number" server6 "server address" • You can register IPv6 DNS Server address. • You can register up to three IPv6 DNS server numbers. ❖ Dynamic DNS function setting msh> dns "interface_name" ddns {on|off} • You can set the dynamic DNS function "active" or "inactive". • {on} means "active" and {off} means "inactive". • wlan can be specified only when the IEEE 802.11b interface unit and the optional SDRAM module are installed. Interface name ether wlan Interface configured Ethernet interface IEEE 802.11b interface 193