Ricoh 8100DN Software Guide - Page 127

Printing with the Finisher Type EU 4 holes Northern EU 4 holes Feed Direction Paper Size K A4, B5, Letter ← L A3, B4, 11"×17" ← K B5, Letter ← L A3, B4, A4, B5, 11"×17", Le- ← gal, 81/2"×13", 81/4"×13, 8"×13", Letter, 51/2"×81/2", 3 71/4"×101/2" Punching Precautions Follow these precautions when using the punch function. Important ❒ To use this function, the optional tray Finisher SR3040 and punch unit must be installed on the printer. ❖ Punch printing will be canceled under the following conditions: • When a paper type that cannot be punched is selected. • When a paper size that cannot be punched is selected. • If positions other than those fixed for punching are specified. • If there are inconsistencies between the orientation in duplex mode and the punch position. • If there are inconsistencies between the orientation in letterhead mode and the punch position. • When feeding paper from the bypass tray. • When the punch receptacle has become full and Auto Continue is set (Printing will continue without punching after the message appears). • If there are inconsistencies between the staple position and the punch po- sition, when using with staple function. 115