Ricoh 8100DN Software Guide - Page 154

Making Printer Settings Using the Control Panel ❖ Bypass Priority When the different paper size or type is specified from the driver, you can specify which setting is given priority to, machine setting or command. • Machine • Driver/Command Note ❒ Default: Driver/Command ❖ Auto Tray SW Specify the printer to change printing to the suitable tray, when printer driver specifies different paper size or type from the current tray. • Off 4 • On Note ❒ Default: Off ❖ RAM Disk If the optional hard disk is not installed for PDF Direct Print, select a value of 2 MB or higher. This menu appears only when the optional hard disk is not installed. • 0 MB • 2 MB • 4 MB • 8 MB • 16 MB Note ❒ Default: 4 MB Important ❒ When the amount of SDRAM is small and RAM Disk is set to 16 MB, printing may not be possible depending on the print job and duplex printing may be canceled. If this happens, increase the amount of SDRAM, or set RAM Disk to 8 MB or less. Reference For details about the optional SDRAM module, see Hardware Guide. 142