Ricoh 8100DN Software Guide - Page 50
When using the PostScript 3 Printer Driver, Form Feed, Banner Send CTRL+D after job
UPC - 026649025952
View all Ricoh 8100DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
Preparing for Printing When using the PostScript 3 Printer Driver Follow the procedure below to set up the PostScript 3 printer driver. 1 Important ❒ In an IPv6 environment, Netware servers cannot be used. A In the [Printers] or [Printers and Faxes] window, open the printer properties. B Click the [PostScript] tab. If you are using Windows 2000/XP or Windows NT4.0, click the [Device Settings] tab, and then clear the check boxes. C Click [Advanced]. D Clear the [Send CTRL+D before job] and [Send CTRL+D after job] check boxes, and then click [OK]. E Click [OK] to close the printer properties dialog box. Form Feed Do not use NetWare to configure form feed. Form feed is controlled by the printer driver on Windows. If NetWare form feed is configured, the printer may not print properly. Follow the procedure below to disable form feed according to the operating system used: • Under Windows 95/98/Me, clear the [Form feed] check box on the [Printer Settings] tab in the printer properties dialog box. • Under Windows 2000/XP, Windows Server 2003, or Windows NT 4.0, clear the [Form feed] check box on the [NetWare Settings] tab in the printer properties dialog box. Banner Page Do not use NetWare to configure a banner page. Follow the procedure below to disable banner pages according to the operating system used: • Under Windows 95/98/Me, clear the [Enable banner] check box on the [Printer Settings] tab in the printer properties dialog box. • Under Windows 2000/XP, Windows Server 2003, or Windows NT 4.0, clear the [Enable banner] check box on the [NetWare Settings] tab in the printer properties dialog box. 38