Ricoh 8100DN Software Guide - Page 209
info, msh> ifconfig ether netmask 255.255.255.0
UPC - 026649025952
View all Ricoh 8100DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 209 highlights
Remote Maintenance by telnet ❖ IPv6 Configuration msh> ifconfig ether inet6 "interface_name " "prefixlen" The following explains how to configure a IPv6 address to 2001:DB8::100 with prefix length 64 on the Ethernet interface. msh> ifconfig ether inet6 2001:DB8::100 64 ❖ Netmask configuration msh> ifconfig "interface_name" netmask "address" The following explains how to configure a subnet mask 255.255.255.0 on Ethernet interface. msh> ifconfig ether netmask 255.255.255.0 ❖ Broadcast address configuration msh> ifconfig "interface_name" broadcast "address" ❖ Changing the Interface msh> ifconfig "interface" up 5 • You can specify either the Ethernet interface or IEEE 802.11b interface when using the optional IEEE 802.11b interface unit. Note ❒ To get the above addresses, contact your network administrator. ❒ Use the default configuration if you cannot obtain setting addresses. ❒ The IP address, subnet mask and broadcast address are the same as that for the ethernet interface and IEEE 802.11b interface. ❒ TCP/IP configuration is the same for both Ethernet and IEEE 802.11 interface. If interfaces are changed, the new interface inherits the configuration. ❒ Use "0x" as the initial two letters of a hexadecimal address. info Use the "info" command to display printer information such as paper tray, output tray, and printer language. ❖ Printer information display msh> info Reference For details about displayed contents, see p.219 "Getting Printer Information over the Network". 197