Ricoh 8100DN Software Guide - Page 227
ccmp: CCMP AES, phrase, Parameter, Value con d
UPC - 026649025952
View all Ricoh 8100DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 227 highlights
Parameter keyphrase " phrase" val {1|2|3|4} encval {1|2|3|4} wepauth [open|shared] rate [auto|11m|5.5m|2m|1m] security {none|wep|wpa} wpaenc {tkip|ccmp} wpaauth {wpapsk|wpa} Remote Maintenance by telnet Value configured You can specify the WEP key when entering in ASCII. With a 64-bit WEP, you can use 10 digit hexadecimals. With a 128-bit WEP, you can use 26 digit hexadecimals. Up to four WEP keys can be registered. Specify the number to be registered with "val". When a WEP is specified by key phrase, the WEP specified by key is overwritten. To use this function, set the same key number and WEP key for all ports that transmit data to each other. You can omit the numbers with "val". The key number is set to 1 when making these omissions. You can specify which of the four WEP keys is used for packet encoding. "1" is set if a number is not specified. You can set an authorization mode when using WEP. The specified value and authorized mode are as follows: open: open system authorized (default) shared: shared key authorized rate You can set the IEEE 802.11b transmitting speed. The speed you specify here is the speed at which data is sent. You can receive data at any speed. auto: automatically set (default) 11m: 11 Mbps fixed 5.5m: 5.5 Mbps fixed 2m:2 Mbps fixed 1m: 1 Mbps fixed You can specify the security mode. none: No encryption(default)S wep: WEP encryption wpa: WPA encryption You can specify WPA encryption key when using WPA encryption. tkip: TKIP (default) ccmp: CCMP (AES) You can specify the WPA authentication mode when using WPA encryption. wpapsk: WPA-PSK authentication(default) wpa: WPA(802.1X) authentication 5 215