Ricoh 8100DN Software Guide - Page 257
Setting Up as a Print Server (NetWare 4.x
UPC - 026649025952
View all Ricoh 8100DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 257 highlights
Using NetWare E Confirm the settings, and then click [OK]. Configuration is now complete. Wait several before restarting Web Image Monitor. F Click [Logout]. Note ❒ To check that the configuration is made correctly, enter the following from the command prompt. F:> USERLIST ❒ If the printer works as configured, the name of the print server appears as a connected user. ❒ If you cannot identify the printer you want to configure, check the printer name with the configuration page printed from the printer. For details about printing a configuration page, see p.130 "List/Test Print Menu". ❒ If no printer names appear in the list, match the frame types of IPX/SPXs for the computer and printer. Use the [Network] dialog box of Windows to change the frame type of the computer. Setting Up as a Print Server (NetWare 4.x, 5/5.1, 6/6.5) 6 Follow the procedure below to connect the printer as a print server using NetWare 4.x, NetWare 5/5.1, or NetWare 6.0. Important ❒ When using the printer as a print server in NetWare 4.x, NetWare 5/5.1, or NetWare 6.0, set it to the NDS mode. ❒ When using NetWare 5/5.1 or NetWare 6.0, set the printer as a print server. A Start Web Image Monitor. B Click [Login]. A dialog box for entering the login user name and password appears. C Enter the login user name and password, and then click [Login]. For details about the login user name and password, consult your network administrator. 245