Ricoh 8100DN Software Guide - Page 146

Making Printer Settings Using the Control Panel Maintenance menu parameters This section explains about parameters that can be set on the Maintenance menu. ❖ Image Density You can select the print image density. • -3 to 3 Reference For details, see Hardware Guide. ❖ Registration You can adjust the starting position of the printing page. 4 • Prt. Test Sheet You can print the registration test sheet. Tray 1, Tray 2, Tray 3, Tray 4, LCT, Bypass Tray, Duplex.BackSide Note ❒ Only the installed trays appear on the display panel. • Adjustment You can select the start position for printing on a page. Vert.:Tray 1, Vert.:Tray 2, Vert.:Tray 3, Vert.:Tray 4, Vert.:LCT, Vert.:Bypass, Vert.:Dup.Back, Hori.:All Trays Note ❒ Only the installed trays appear on the display panel. ❖ Del. All Temp This appears on the menu only when the hard disk is installed. Use this function to delete all temporarily saved documents (Sample Print, Locked Print and Hold Print data) at once. ❖ Del. All Stored This appears on the menu only when the hard disk is installed. Use this function to delete all saved documents (Stored Print data) at once. ❖ HD Format Appears when the hard disk is installed. ❖ Date/Time Use this to set the date and time. ❖ WL.LAN Signal You can check the signal strength when using LAN. The menu appears when the 802.11b interface unit and the optional SDRAM module are installed. ❖ WL.LAN Defaults Reset the wireless LAN to default. The menu appears when the 802.11b interface unit and the optional SDRAM 134 module are installed.