Sharp AR-M205 AR-M160 AR-M205 Operation Manual - Page 11

BEFORE USING THE MACHINE 18 19 20 21 22 23 1 24 26 27 25 28 29 16 Parallel port Connect to your computer to use the printer function. (Software Setup Guide) 17 USB 2.0 port (when the dual function board is installed) Connect to your computer to use the printer and scanner functions. (Software Setup Guide) 18 Document feeder tray (when the SPF/RSPF is installed) Place the original(s) that you wish to scan face up here. Holds up to 40 originals. 19 Original guides (when the SPF/RSPF is installed) Adjust to the size of the originals. 20 Feeding roller cover (when the SPF/RSPF is installed) Open to remove misfed originals. (p.63) 21 Right side cover (when the SPF/RSPF is installed) Open to remove misfed originals. (p.63) 22 Exit area (when the SPF/RSPF is installed) Originals exit the machine here after copying/scanning. 23 Reversing tray (when the RSPF is installed) Pull out to remove misfed originals. (p.64) 24 Toner cartridge lock release lever To replace the toner cartridge, pull out the toner cartridge while pushing on this lever. 25 Toner cartridge Contains toner. (p.70) 26 Roller rotating knob Turn to remove misfed paper. (p.65, p.66) 27 Fusing unit release levers To remove a paper misfeed in the fusing unit, push down on these levers and remove the paper. (p.66) The fusing unit is hot. Do not touch Warning the fusing unit when removing misfed paper. Doing so may cause a burn or injury. 28 Photoconductive drum Copy images are formed on the photoconductive drum. 29 Fusing unit paper guide Open to remove misfed paper. Note The model name can be seen to the machines front cover. 9