Sharp AR-M205 AR-M160 AR-M205 Operation Manual - Page 16
Loading the paper tray
View all Sharp AR-M205 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
BEFORE USING THE MACHINE LOADING PAPER Make sure that the machine is not copying or printing, and then follow these steps to load paper. Loading the paper tray 1 Gently lift and pull out the paper tray until it stops. 5 Gently push the paper tray into the machine. 2 Push the pressure plate down until it locks in place. Push the center of the pressure plate down until it locks into place. Note If you loaded a different size of paper than was loaded previously in the tray, go to "CHANGING A TRAY'S PAPER SIZE SETTING" (p.16). 3 Fan the paper. If the paper is not fanned, double-feeds or misfeeds may occur. 4 Load paper into the tray. Note • Do not load paper higher than the line on the tray (up to 250 sheets). • Make sure that the paper fits under the tab on the right side of the tray. • Make sure the stack of paper is straight before loading it. When adding paper, take the remaining paper out and combine it into a single stack with the new paper. 14