Sharp AR-M205 AR-M160 AR-M205 Operation Manual - Page 33
Interrupting A Copy Run
View all Sharp AR-M205 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
INTERRUPTING A COPY RUN (Interrupt copying) A copy run can be temporarily interrupted to allow another copy job to be performed. When the other job is finished, the copy run will resume using the original copy settings. Note Interrupt copying is not possible when the user programs are being configured, or when automatic two-sided copying, sort/group copying, or 2 IN 1 / 4 IN 1 copying is being performed. 1 Press the [INTERRUPT] key ( ) to interrupt the copy run. INTERRUPT The INTERRUPT indicator will light up and the machine will revert to the initial settings. (p.12) The INTERRUPT indicator will blink until the current copy run stops. Note • If the SPF/RSPF is being used, the copy run will not stop until the set number of copies is completed. • If "Auditing mode" is enabled: "- - -" will appear in the number of copies display. Enter your 3-digit account number. Copying will not be possible unless a correct account number is entered. (p.51) 2 Remove the previous original(s) and place the original(s) of the interrupt copy job. 3 Set the number of copies and other copy settings and then press the [START] key ( ). The copy will be C delivered to the paper output tray slightly offset from the copies of the interrupted run. (Offset B A function) The offset function can be disabled in the user programs. (p.45) A: Copies made before the interrupt copy job B: Interrupt copy job C: Copies made after the interrupt copy job 4 When the copy job is finished, press the [INTERRUPT] key ( ) and remove the original(s). The INTERRUPT indicator will go off, indicating that the interrupt function is no longer operating. The copy settings will automatically revert to the settings selected for the copy run before the run 2 was interrupted. 5 Replace the previous original(s) and press the [START] key ( ). The interrupted copy run will resume. 31