Sharp AR-M205 AR-M160 AR-M205 Operation Manual - Page 65
Misfeed Removal - drum
View all Sharp AR-M205 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
MISFEED REMOVAL When a misfeed occurs, the misfeed indicator ( ) and a misfeed location indicator ( ) will blink and the machine will automatically stop. Check the blinking misfeed location indicator to identify the location of the misfeed and remove it. Note The paper may tear when you remove a misfeed. In this event, be sure to remove all torn pieces of paper from the machine, taking care not to touch the photoconductive drum (the green part). Any scratches or damage to the surface of the drum will cause dirty copies. AR-M205 (p.63) (p.64) AR-M160 (p.63) (p.64) (p.68) (p.69) (p.68) MISFEED IN THE SPF/RSPF 1 Remove the misfed original. Check sections A, B, and C in the left shows the illustration (see the next page), and remove the misfed original. Section B Open the SPF/RSPF and rotate the two release rollers in the direction of the arrow to feed the original out. Close the SPF/RSPF and then remove the original. Section A Open the feeding roller cover and remove the misfed original from the document feeder tray. Close the feeding roller cover. Feeding roller cover Roller 6 If a small original (5-1/2" x 8-1/2", etc.) is misfed, or if an original misfeed occurs in the reversing tray of the RSPF (if installed), open the right side cover and remove the original. Close the right side cover. Right side cover 63