Sharp AR-M205 AR-M160 AR-M205 Operation Manual - Page 20

2 Chapter 2 COPY FUNCTIONS This chapter explains basic copying functions such as normal copying, reduction or enlargement, and exposure adjustment. NORMAL COPYING This section explains how to make a regular copy. If "Auditing mode" has been enabled (p.51), enter your 3-digit account number. Copying from the document glass 1 Open the document cover/SPF/RSPF, and place the original. 3 Press the [ORIGINAL SIZE ENTER] key and select the original size. GINAL PAPER SIZE ORIGINAL SIZE ENTER 11X17 8½X14 8½X11 8½X5½ 8½X11 EXTRA When the original size is selected, the tray with the same size of paper is automatically selected. Place the original face down on the document glass. Align it with the original size scale. Note An original up to 11" x 17" can be placed on the document glass. 2 Close the document cover/SPF/RSPF. G Make sure that the PAPER SIZE indicator lights up. G If the indicator is not lit, no tray has the same size of paper as the original. Load paper of the required size in a tray, or select the bypass tray with the [TRAY SELECT] key ( ) and copy from the bypass tray. G The bypass tray must be manually selected. G To copy on paper of a different size than the original, select the paper with the [TRAY SELECT] key ( ). 4 Set the number of copies. 5 Press the [START] key ( ) to begin copying. START The copy is delivered to the paper output tray. 18 Note • The paper output tray can hold up to 250 sheets of paper. • About one minute after copying ends, "Auto clear timer" activates and restores the copy settings to the initial settings. (p.12) The setting for "Auto clear time" can be changed in the user programs. (p.44) • Press the [CLEAR] key ( ) to stop copying in the middle of a run.