Sharp AR-M205 AR-M160 AR-M205 Operation Manual - Page 66
Misfeed In The Bypass Tray
View all Sharp AR-M205 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
TROUBLESHOOTING Section C Remove the misfed original from the exit area. If the misfed original cannot be easily removed from the exit area, open the moveable part of the document feeder tray and remove the original. If an RSPF is installed, remove the reversing tray and then remove the original. 2 Open and close the SPF/RSPF to make the misfeed location indicator stop blinking. You can also make the misfeed indicator stop blinking by opening and closing the feeding roller cover or the right side cover. 3 Return the originals indicated by the minus number in the display to the document feeder tray and press the [START] key ( ). Copying will resume from the originals that still remained when the misfeed occurred. Note After removing a misfed original from the exit area, be sure to attach the reversing tray securely to the exit area (when the RSPF is installed). MISFEED IN THE BYPASS TRAY 1 Gently pull the misfed paper out. 2 Open and close the side cover. The misfeed indicator ( ) will go out. 64 Note • When closing the side cover, press down on the handle. • If the misfeed indicator ( ) does not stop blinking, check for torn pieces of paper in the machine.